Dual Fuel Range Cooker With 13amp Plug
Are you a home chef who loves the responsive heating control of gas cooktops but wants an electric oven for baking? Find a dual fuel cooker that offers the best of both worlds.
Gas cooktops are preferred by many home chefs with experience in the kitchen due to their superior temperature control. They also allow them to utilize advanced cooking techniques, such as charcoaling. These powerful stoves are expensive, especially if they require an additional gas connection as well as an electrician for installation.
What is a 13amp plug?
If you have a dual fuel range cooker (also known as a gas cooker and an electric oven) you'll need an electrical outlet of 13 amps. The plug must also be hard-wired by a certified electrician to the cooker ring.
This ensures that the current flowing through the plug will not exceed the limit of safety which could cause an electrical fire. The plug has a fuse that controls the current. The fuse goes out when the current flows through it beyond its capacity. This safeguards the appliance from overload of electricity.
The fuse is rated 13 amps, as indicated on the top of the plug. This is the maximum amount of current the plug can pass without damaging the appliance or heating the socket. It is essential that when replacing fuses you always use the same amps as the original. If you replace the fuse with one of the different ratings, you run the risk of overheating the socket, and potentially putting you and others at high risk.
Ceramic 13 amp fuses are very durable and can withstand high temperatures that can be generated by an oven. Ceramic elements are also fire-resistant, and therefore a better choice than other types.
There are several ways that 13 amp plugs can be connected. The plug can be connected to a live socket using screws or a plastic jaw cord clamp. The clamp on the cord should be tightened after the plug is securely pushed into position.
Some plugs may have a diagram of wiring on cardboard over the pins and these must be removed prior to connecting the wires. It is vital that the wires are cut to the correct length as cutting them too long could result in them becoming crushed when the plug cover is replaced. The earth wire must be the longest one to ensure that it is connected before the neutral and line pins.
How do I install an outlet with 13amps?
The vast majority dual fuel range cooker s in UK are equipped with a 13 amp plug. This is important since ovens draw significant current, and normal plug sockets have a 10 amp rating.
In general new appliances should have a plug installed at the point-of-sale. This is to ensure compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. However, older appliances may not be connected to a plug and this is where the issue arises.
The first step to take when connecting a cooker with an existing plug socket is to ensure that the rating of the fuse in the fuse box matches the rating of the plug. This is vital because a faulty fuse could be dangerous.
It is also recommended that the fuse is fully seated in the cartridge, and that there isn't any movement. Next up is to prepare the flex to be used. Take off the sheathing and reveal the three insulated conductors. Then, nick the sheathing at the point of entry to the plug (beyond the cord grip) using a utility knife, but without damaging the individual insulated conductors. This nick must be large enough to allow the sheathing and cable to separate when the sheathing is pulled back. Cut off the excess sheathing, leaving about 40mm beyond the flex.
The flex is positioned over the plug and the earth terminal is placed at the top and neutral and live terminals at the bottom. The sheathing of each pin is removed using coloured conductors as a guide. The internal cable is then inserted to the terminal by using the cord grip. If the plug is fitted with an screw-type clamp for cords loosen it and pull back the insulation to expose the copper conductors. Finally, connect each insulated conductor to the correct terminal (starting with the earth first, then neutral and finally the live) by using the channel that they run through in the plug.
What is the maximum draw of a plug with 13amps?
The maximum current draw for 13amp plugs at 300 volts is 3kw. This is a significant amount of power, but the standard fuse that comes with a UK plug will not fail until the cable reaches a dangerous temperature. A faulty plug or socket may cause fire, so it's vital to be aware of how much you are using, especially in the kitchen.
The fuses in plugtops are ceramic, around 25mm long and rated 240V mains. The fuses are marked with the BS Kitemark or similar mark on the side and they'll contain sand. Alternatives to glass or plastic are available, but should never be used in conjunction with a live plug.
The majority of dual fuel range cookers in the UK require hard-wired and cannot be plugged directly into a wall socket. They are typically connected to a separate cooker ring circuit, which is only suitable for appliances that use up to 20 amps.
You can check the ring circuit of your home by looking at the fuse box, or by speaking to an electrician nearby. They will be able to inform you if the sockets in your home are connected to the same ring, or if they are separate and whether there is a dedicated circuit for your oven.
If you're considering buying a new dual-fuel range cooker, the size of your kitchen is an important factor to consider. Luckily, we have a wide selection of cookers to suit any space, including compact 50 - 60cm dual fuel models, as well as massive 90cm + double oven options from leading brands like Rangemaster and StovesAreUs.
We also have a broad selection of multi-function electric and gas cookers. These multifunction cookers allow you to cook a variety of meals including casseroles, pasta and curries.
Explore our entire range of Cookers in Currys online or visit us in-store to take a look. We provide free home installation and delivery on a selection of range cookers as well as flexible payment options. If you have any queries, our team are available to assist - just drop us an email or give us a call. Credit is subject to status and terms & conditions apply.
What is the most draw for a switch for a cooker?
There is plenty of confusion over what the maximum current draw of a cooker switch actually is. The majority of cookers are hard-wired and connected to a specific oven-ring circuit, not the standard socket. It is because they often consume more than 20 amps when the gas hob and electric oven are used.
There aren't any dual fuel range cookers that can be fitted in standard sockets, as this would pose an extremely high risk of fire and would violate electrical regulations. An experienced electrician will install any new electrical wiring to an appliance in the kitchen and will make sure that the load (both the hob and oven) will not exceed the capacity of supply of that circuit.
The benefits of a dual fuel range cooker are the receptive heat of a gas cooktop and the precise operation of an electric oven. This is why they're popular among chefs and cooks at home alike. Dual cookers with fuel ranges are ideal for experimenting with various cooking techniques, such as searing or charcoaling.
When you are looking to purchase a new range cooktop, you must be aware of a number of aspects that include size, performance and cost. You will also require a gas connection in your home for the appliance. If you're unsure you're not sure, it's recommended to have a Gas Safe engineer inspect your property prior to installation.
Currys' dual fuel range cookers are available in a range of models that will fit all budgets. From budget-friendly models from Indesit and Zanussi, to our own Essentials collection. If you're looking for something bit more sophisticated, we also stock a wide selection of premium JennAir ranges, which come with many innovative features.
It is crucial to read the instruction manual for the owner before purchasing a dual fuel range cooker. This will give you specific information about the electrical and gas requirements. You will need to ensure that your home has a gas hook-up suitable and you may have to have a plumber install this for you if it is required. You might also require a dedicated cooker-ring circuit, installed by a certified electrical engineer.